Product ID:1002 PRE/POST CLEANER
MSDS Date:06/03/1992
FSC:3439
NIIN:00N047819
MSDS Number: CDMRT

EUTECTIC CORP

40-40 172ND ST
FLUSHING, NY 11358-2799
US

Emergency Phone: 718-358-4000

Info Phone: 718-358-4000

Cage: 72271

EUTECTIC CORP

CHARLOTTE, NC 28273 US

Telephone: 704-527-9800/ 800-221-1433

Cage: 72271

MAY BE EXPOS TO INCL COATINGS ON WORKPIECE (PAINT,

RTECS: 9999999ZZ

SPACE, QUALITY & AMT OF VENT, POSITION OF WORKER'S

RTECS: 9999999ZZ

OF CONTAMS IN ATMS (SUCH AS CHLORINATED HYDROCARBONS

RTECS: 9999999ZZ

WELDING, THERMAL SPRAYING & ALLIED PROCESSES, FUME &

RTECS: 9999999ZZ

FORM FROM INGS LISTED. DECOMP PRODS OF NORMAL

RTECS: 9999999ZZ

OXIDATION OF INGS, PLUS THOSE OF BASE METAL &

RTECS: 9999999ZZ

COMPLEX OXIDES OF INGS. GASEOUS RXNS PRODS MAY INCL

RTECS: 9999999ZZ

OXIDES & CERTAIN INERT GASES USED AS SHIELDING

RTECS: 9999999ZZ

& GASES IN WHICH WORKERS ARE EXPOSED IS TO TAKE AN

RTECS: 9999999ZZ

BRTHG ZONE. SEE ANSI/AWS F1.1 AVAIL FROM AWS. P.O.

RTECS: 9999999ZZ

"EVALUATING CONTAMINANTS IN THE WELDING ENVIRONMENT

RTECS: 9999999ZZ

ADVICE ON SAMPLING.

RTECS: 9999999ZZ

SODIUM SULPHATE

CAS: 7757-82-6

RTECS: WE1650000

OSHA PEL N/K

ACGIH TLV: N/K

1); (MAGNESIUM

CAS: 16949-65-8

RTECS: VV8575000

OSHA PEL 5 MG/M3, C (MG)

ACGIH TLV: 10 MG/M3 (MG)

PHOSPHORIC ACID, TRISODIUM SALT; (SODIUM PHOSPHATE)

CAS: 7601-54-9

RTECS: TC9490000

OSHA PEL N/K

ACGIH TLV: N/K

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ALKYL ARYL SULFONATE; (ALKYL ARYL SODIUM SULPHONATE)

CAS: 68037-49-0

RTECS: AZ8400000

OSHA PEL N/K

ACGIH TLV: N/K

FLAMM EVAPORATES. PROVIDE ADEQ VENT. CANS UNDER

RTECS: 9999999ZZ

HEATING, WELDING, BRAZING, SOLDERING,

RTECS: 9999999ZZ

SIMPLY. COMPOSITION & QTY OF THESE ARE DEPENDENT UPON

RTECS: 9999999ZZ

CONSUMABLES USED. OTHER CNDTNS WHICH ALSO INFLUENCE

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:FUMES ASSOCIATED WITH HEATING,
WELDING, BRAZING, SOLDERING OR CUTTING METALS CAN BE DANGEROUS TO
YOUR HEALTH AND OVEREXPOSURE CAN CAUSE LUNG DAMAGE AND/OR OTHER
ORGAN DAMAGE. EYE/SKIN CONTACT:AR C RAYS AND ULTRAVIOLET LIGHT CAN
INJUREEYES AND BURN SKIN. LIQUIDS USED IN CHEMICAL AIDS MAY CAUSE
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:IRRITATION OR POSSIBLE CHEMICAL BURNS.
ELECTRICAL SHOCK CAN KILL. INGESTION:DANGER! MAY BE HARMFUL OR
FATAL IF SWALLOWED.
Medical Cond Aggravated by Exposure:AGGRAVATION OF PREEXISTING
RESPIRATORY OR ALLERGIC CONDITIONS MAY OCCUR IN SOME WORKERS.

First Aid:INHAL:MOVE VICTIM TO FRESH AIR SOURCE. CONTACT MD & ADVISE ON
INGS. SKIN:THOROUGHLY WASH HANDS OR AFFECTED AREAS W/SOAP & WATER
TO REMOVE ALL RESIDUE. IF RASH OR BURN DEVELOPS, CONSULT MD.
EYES:THOROU GHLY FLUSH W/WATER FOR AT LEAST 15 MINUTES TO REMOVE TO
REMOVE ALL RESIDUE. OBTAIN PROMPT MEDICAL ADVISE FOR CHEMICAL AIDS.
ADVISE MD OF INGS. INGEST:CALL MD &/OR LOCAL POIS CTL CTR. ADVISE
OF INGS.

Extinguishing Media:CO*2, DRY CHEMICAL FOAM TYPE.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:REFER TO ANSI Z49.1 FOR FIRE PREVENTION
DURING USE OF WELDING & ALLIED PROCESSES. SOME E & C CHEM AIDS ARE
FLAMM. REFER TO ING SECTION, CHEM HAZS INFO &(SUPDAT)

Spill Release Procedures:IF A CHEM AID IS ACCIDENTALLY SPILLED, CONTAIN
SPILL, ABSORB & SWEEP UP. FLUSH AREA W/WATER TO APPRVD CHEM DRAIN.
USE APPROP MEASURES TO KEEP AIRBORNE DUST LEVELS CONTAINED I/A/W
EXPOS LEVELS OF INGS. SEE SECTION 8 FOR PROPER SAFE HNDLG &
STORAGE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:HANDLE W/CARE. AVOID PROLONGED SKIN
CONTACT. TRAIN WELDER TO KEEP HIS/HER FACE AWAY FROM FUME/DUST
PLUME.
Other Precautions:PLEASE READ & UNDERSTAND PRODUCT LABEL INFORMATION
FOR PROPER PROCEDURES & USE.

Respiratory Protection:IF WORK STATION IS NOT PROPERLY VENTILATED TO
EXHAUST ALL FUMES, VAPORS & DUSTS BELOW RECOMMENDED EXPOSURE
LIMITS, USE A NIOSH APPROVED RESPIRATOR.
Ventilation:USE ENOUGH GEN VENT & LOCAL EXHAUST AT WORK SITE TO KEEP
ALL FUMES & DUST FROM WORKER'S BREATHING ZONE & GENERAL AREA.
Protective Gloves:RUBBER; CHEM & OIL IMPERVIOUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS &(SUPDAT)
Other Protective Equipment:ANSI APPRVD EYE WASH FOUNTAIN & DELUGE
SHOWER . WEAR PROPER EAR & BODY PROT. USE FULL PROT EQUIP NORMALLY
(SUPDAT)
Work Hygienic Practices:ALWAYS WASH HANDS THOROUGHLY AFTER USE. DO NOT
WEAR CONTACT LENSES.
Supplemental Safety and Health
EYE PROT:FULL LGTH FCSHLD W/FILTER LENS REC FOR SPECIFIC WELDING
OPERATION. OTHER PROT EQUIP:USED IN WELDING/BRAZING OPERATIONS SO
AS TO PREVENT SKIN CONT. EXPLO HAZ:READ CNTNR LBL. WHEN PREPAR ING
WORKPIECE W/FLAMM CHEM AID, KEEP ALL WELDING SOURCES, SPKS &
FLAMES, AT LST 20 FEET FROM WORKPIECE UNTIL (ING 5)

Appearance and Odor:WHITE POWDER.

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, CYANIDES, SULFIDES.
Stability Condition to Avoid:HEAT, FLAME, SPARKS.
Hazardous Decomposition Products:SOME CHEM AIDS MAY GIVE OFF HYDROGEN
CHLORIDE, PHOSGENE & CHLORINE GASES. FUMES, GASES & DUSTS GIVEN OFF
DURING (ING 6)

Waste Disposal Methods:DISPOSE OF IN AN ENVIRONMENTALLY SENSITIVE
MANNER I/A/W FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.